(base) C:\Users\User\Desktop\AstroEQ-ConfigUtility\bin>avrdude -C avrdude.conf -F -pm162 -PCOM4 -cstk500 -v -e -U flash:w:optiboot_atmega162.hex:i -U hfuse:w:0xDC:m -U lfuse:w:0xFF:m -U efuse:w:0xFB:m -v
avrdude: Version 6.0.1, compiled on Sep 18 2013 at 08:20:41
Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
Copyright (c) 2007-2009 Joerg Wunsch
System wide configuration file is "avrdude.conf"
Using Port : COM4
Using Programmer : stk500
AVR Part : ATmega162
Chip Erase delay : 9000 us
PAGEL : PD7
BS2 : PA0
RESET disposition : dedicated
RETRY pulse : SCK
serial program mode : yes
parallel program mode : yes
Timeout : 200
StabDelay : 100
CmdexeDelay : 25
SyncLoops : 32
ByteDelay : 0
PollIndex : 3
PollValue : 0x53
Memory Detail :
Block Poll Page Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack
----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
flash 65 10 128 0 yes 16384 128 128 4500 4500 0xff 0xff
eeprom 65 20 4 0 no 512 4 0 9000 9000 0xff 0xff
lfuse 0 0 0 0 no 1 0 0 16000 16000 0x00 0x00
hfuse 0 0 0 0 no 1 0 0 16000 16000 0x00 0x00
efuse 0 0 0 0 no 1 0 0 16000 16000 0x00 0x00
lock 0 0 0 0 no 1 0 0 16000 16000 0x00 0x00
signature 0 0 0 0 no 3 0 0 0 0 0x00 0x00
calibration 0 0 0 0 no 1 0 0 0 0 0x00 0x00
Programmer Type : STK500V2
Description : Atmel STK500
Programmer Model: STK500
Hardware Version: 1
Firmware Version Master : 2.10
Topcard : Unknown
Vtarget : 0.0 V
SCK period : 17.4 us
Varef : 0.0 V
Oscillator : Offavrdude: AVR device initialized and ready to accept instructions
Reading | ################################################## | 100% 0.22s
avrdude: Device signature = 0x1e9404
avrdude: safemode: lfuse reads as 62
avrdude: safemode: hfuse reads as 99
avrdude: safemode: efuse reads as FF
avrdude: erasing chip
avrdude: reading input file “optiboot_atmega162.hex”
avrdude: writing flash (16384 bytes):
Writing | ################################################## | 100% 0.28s
avrdude: 16384 bytes of flash written
avrdude: verifying flash memory against optiboot_atmega162.hex:
avrdude: load data flash data from input file optiboot_atmega162.hex:
avrdude: input file optiboot_atmega162.hex contains 16384 bytes
avrdude: reading on-chip flash data:
Reading | ################################################## | 100% 0.28s
avrdude: verifying …
avrdude: 16384 bytes of flash verified
avrdude: reading input file “0xDC”
avrdude: writing hfuse (1 bytes):
Writing | ################################################## | 100% 0.10s
avrdude: 1 bytes of hfuse written
avrdude: verifying hfuse memory against 0xDC:
avrdude: load data hfuse data from input file 0xDC:
avrdude: input file 0xDC contains 1 bytes
avrdude: reading on-chip hfuse data:
Reading | ################################################## | 100% 0.07s
avrdude: verifying …
avrdude: 1 bytes of hfuse verified
avrdude: reading input file “0xFF”
avrdude: writing lfuse (1 bytes):
Writing | ################################################## | 100% 0.09s
avrdude: 1 bytes of lfuse written
avrdude: verifying lfuse memory against 0xFF:
avrdude: load data lfuse data from input file 0xFF:
avrdude: input file 0xFF contains 1 bytes
avrdude: reading on-chip lfuse data:
Reading | ################################################## | 100% 0.07s
avrdude: verifying …
avrdude: 1 bytes of lfuse verified
avrdude: reading input file “0xFB”
avrdude: writing efuse (1 bytes):
Writing | ################################################## | 100% 0.10s
avrdude: 1 bytes of efuse written
avrdude: verifying efuse memory against 0xFB:
avrdude: load data efuse data from input file 0xFB:
avrdude: input file 0xFB contains 1 bytes
avrdude: reading on-chip efuse data:
Reading | ################################################## | 100% 0.10s
avrdude: verifying …
avrdude: 1 bytes of efuse verified
avrdude: safemode: lfuse reads as FF
avrdude: safemode: hfuse reads as DC
avrdude: safemode: efuse reads as FB
avrdude: safemode: Fuses OK (H:FB, E:DC, L:FF)
avrdude done. Thank you.
(base) C:\Users\User\Desktop\AstroEQ-ConfigUtility\bin>